Tx Deviation / Channel Spacing

When the Mixed Vote Scan Enable field is Enabled and the Mixed Vote Scan Tx Steering field is Disabled, this field must be a match for all Frequency Options in the current Personality; otherwise the CPS considers this field’s value invalid.

Frequency Option profiles can be selected for use within the Zone Channel Assignment's Channels Page; first, the personality is selected in the Personality field, and then the Frequency Options profile is selected in the Frequency Options field.

SELECTIONS:

DEFINITIONS:

4 kHz / 20 kHz

821 MHz Band using 20 kHz Channel Spacing.

This selection is invalid if the following scenario is true:

When the 12.5 kHz FCC Narrowbanding Mandate applies for this codeplug, and

when the value of the Tx Frequency OR ( Direct Frequency OR TA Frequency when enabled for Direct / Talkaround operation ) falls into one of the FCC Requirement ranges.

5 kHz / 25 kHz

VHF, UHF, and 800 MHz Bands using 30/25/25 kHz Channel Spacing.

This selection is invalid if the following scenario is true:

When the 12.5 kHz FCC Narrowbanding Mandate applies for this codeplug, and

when the value of the Tx Frequency OR ( Direct Frequency OR TA Frequency when enabled for Direct / Talkaround operation ) falls into one of the FCC Requirement ranges.

2.5 kHz / 12.5 kHz

VHF, UHF, 800 MHz, and 900 MHz Band Analog and 12.5 kHz Channel Spacing.

When Tx Frequency falls within the 900 MHz Band, this is the only valid selection and this field becomes view-only.

This selection is invalid if either of the following scenarios is true:

(When the Rx Voice / Signal Type field is "Non-ASTRO Mode", and

when the Secure Operation field is set to "Hardware", and

when the Voice Secure / Clear Strapping field is not set to "Clear"),

Or

(When the Rx Voice / Signal Type field is "Mixed Mode" or "ASTRO Mode", and

when the ASTRO Digital Modulator Type field is "Wide").